Follow

Setting the tablet IP address

1.    Connect the tablet and router that you were sent to the existing bridge in the display.

  • The tablet was sent with a USB to Ethernet cable to connect the tablet to the router
  • Do NOT connect the router or the tablet to the Internet

2.    Power on the tablet, it will automatically boot into the Pro-Motion Hue App


3.    To exit the app, press the screen > “Learn More” > tap screen twice >
tap the “Hue Tap” section > press the Hidden Button, which is the 1 button (single dot) on the picture of the Tap on the screen > enter
the password “0443”

  • On the next screen, tap the door icon on the lower right of the screen
  • Press the three vertical dots on the upper right corner of the next screen > choose “Exit” > “Yes”
  •  If at any point you are asked for a password by the tablet, enter the password “11223344"

4.    Select Exit (Exit Pulse Player) on the left of the screen


5.    Press the back button on the back of the tablet, on the bottom in the center (round gray button) to get out of the screen with the Apps


6.    Press the Android Settings button (see below) > More > Ethernet > Static IP Setting > Use Static IP > enter the following

  • IP: 192.168.1.10
  • Gateway: 192.168.1.1
  • Netmask: 255.255.255.0
  • DNS 1: 192.168.1.1
  • DNS 2: leave this blank, do not put anything in this field

7.  Tap “Save” in the upper right > press the back button (back of tablet, center, bottom)

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments