Follow

Replacing the Tablet

  • Open up the front cover to access the components [there are 2 thumb screws under the display, one on each site, remove the thumb screws (underside of where the RED ovals are in the picture below), and then open the display, the cover is on piano hinges].

 

  • Remove the current informational graphic exposing the “tablet” plate
  • Unscrew the tablet plate
  • Install tablet
  • Plug the tablet into the bridge
  • Remove tap

 

Now, you will need to set the Tablet IP.  Click here

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments